We are pleased to announce that the AdvertServe Q3/2016 update has been deployed!
Has it really been 8 months without an update? Some of you may have even contacted us to ask if
we were still alive. Indeed we are alive and well. The truth is that time flies and we have simply
been busy working on a ton of new features and improvements for you. I almost feel like we should
apologize for dropping so many new features all at once, but I think we have done such a great
job integrating them that you will hopefully feel like they’ve been there all along. In any case,
enjoy the new features and thank you all for being our loyal customers!
Have you ever faced a situation where an advertiser buys a fixed number of impressions that should
be run over a period of time, but they throw you a curve ball and ask you to run a different creative
every week for four weeks? In the past such a request had to be dealt with by creating four campaigns
and dividing the impressions between them. Of course, that was an error-prone solution because if one
of those campaigns came up short you would need to add the missed impressions to the remaining campaigns
every week. Similar situations could arise if an advertiser wants to have different creatives running
on different areas of a site and can get even more tedious to deal with if they have complex frequency
capping or targeting goals. Fortunately parent/child campaigns are a solution to all of these
problems and more! You can simply create a parent campaign that defines the start date, stop date
and impression limit. Then you can create any number of child campaigns that can have their own
independent schedules, capping, limits, targeting and media/zone assignments. The child campaigns can also
inherit some or all of those settings from the parent too, which helps avoid duplication so things like
targeting changes can be made more rapidly in mid-flight.
For further details and a tutorial showing how to set up parent/child campaigns, please
click here to learn more…
Understanding how visitors interact with ads can be critical in helping to identify why ads are under-performing.
We now track user interactions with ads (i.e. mousing over or touching them), how long they interactive with them,
the number and length of time ads are expanded, clicks on close buttons and more. We also have a unique way of
measuring how much users are actually being engaged.
The reality of viewability is potentially a scary one for publishers, but for advertisers it provides validation
that their ads are being viewed. We follow the IAB guidelines that mandate ads must be 50% viewable for at least
one second in order to be counted as a viewable impression. Generally a viewability rate of 70% or more is
considered acceptable. At this point, we see viewability as more of an insightful metric rather than a transactional one.
Meaning we do not suggest transacting on viewable impressions as this is new technology and viewability cannot be reliably
measured for a small percentage of users with unsupported browsers. That being said, we recognize that many of you may
not be ready to reveal viewability data to your advertisers so we have not enabled viewability reporting for any of your
advertisers – we leave the choice to turn it on for them in their account permissions up to you.
Mass Report Generation
When you want to compare the performance of several campaigns or zones it would be helpful if you
could select multiple campaigns or zones to include in a single report right? Now you can! In fact,
this works automatically when you generate a report for a parent campaign and it will auto-include all
of its child campaigns.
For far too long our inventory reports have been practically useless. We decided to completely scrap and redesign
them. Now they show both paid and default impressions/clicks side-by-side so you can easily see your inventory
utilization. We also now track missed ops to show the number of times a zone was invoked but resulted in no
impression, which may be due to any of the following reasons: zone is disabled, defaults are disabled in zone settings,
multi-ad units display fewer ads than desired or an unrecoverable error occurs. In addition to that we also show
how many impressions were filtered by our blacklist or robot filtering, which can be helpful to check the clean
factor of your inventory.
(redirects to different links) and HTML5 video playback. In addition to that it supports HTML5 expandable banners,
pushdown banners and even banners that expand into a lightbox or a fullscreen takeover which works especially well
on tablets and mobile phones. The best part is that all of those things can be implemented with just one or two lines of
top things off it even has auto-generated test pages that make testing a breeze.
For a demonstration of what you can do with this new HTML5 API as well as the test page functionality, please
click here to be amazed…
and learn more by checking out the documentation or
downloading the creative files to see
how it all works.
HTML5 Asset Management
Many customers have been enjoying the new HTML5 support that we released last year, but managing changes to asset files was
a major pain. You had to make the changes to CSS, JS or image files on your computer and re-upload the ZIP file with all of
the assets. We listened and now you can live edit plain text files (including CSS and JS) and re-upload individual binary files
(i.e. fonts or images). Still want to have a copy of the files on your computer though? No sweat because we also added a button
to let you download a ZIP of all of the asset files in one click.
Our options to substitute different zones on tablets or mobile phones as well as hide them are super helpful
when working with responsive web sites. However, there can be cases where you only want a zone to appear on tablets
or mobile phones. To handle such cases you can now set a zone to hide itself on desktop devices too!
Automatic Test Pages
How many times have you created a media, generated a code for it, put it into a test.html file and sent it off to
the advertiser so they can preview it? Too many, but the good news is you do not have to do it anymore! After you
create a media just click on the Test Page link and it will auto-generate a test page for you. Simply copy the
link to that test page out of the browser address bar and send the link to your advertiser so they can see it too.
Have you noticed that a lot of third-party VAST tags never showed any ads in our preview tool? We have a confession
to make: the version of JW Player we were using was badly out of date and did not support VPAID ads. It has now been
upgraded to the latest version and you can also switch between HTML5 and Flash mode to test it both ways.
There is one thing that has always been missing from the reports you export from AdvertServe and send to your advertisers
or publishers. Do you know what it is? Your logo. Yes, finally, you can include your logo in the reports to give them
that extra professional look. Just go to Settings > Basic > Reports and upload your logo. It must be a PNG
file and the ideal size is no larger than 287×118 pixels.
How many times have you had to explain to advertisers what CTR or ACR represent? If your answer is too many, well,
we have good news for you. We have added an appendix to the reports with definitions of all reporting metrics for
you to direct those questions to.
Report Your Way
Summary reports do not include all data by default. Many users have found this frustrating because this can sometimes
be too much or too little data. To address this problem you can now customize the default report settings in your account preferences.
Just click on My Account in the main tool bar, scroll down to Account Preferences and click on the Reports
tab to set it up the way you like.
Sometimes you do not need to host a creative and all you really need are pixels to track views and clicks.
Now you can simply create a 1×1 graphic banner media with a 1×1 gif and your link. Then choose the new Pixel Code
option when generating the code and it will simply give you pixels instead of making you tear them out of a snippet of HTML code.
Incidentally you can generate pixels for any type or size media.
Mobile application developers will love this one. In many of the apps we see being created today it is common for there to
be a list of articles for a user to scroll through and you want to insert ads between every so many articles. The problem is you
want to show a different ad each time, but how do you deal with that because the ad server decides which ad will be shown at random
right? Well, now you can pre-fetch a batch of up to 100 unique ads at once and the API will either return JS or IFRAME tags that
you can use to load them as needed. Tracking of impressions is delayed until the tags are actually loaded, so if you end up not
using them it is no big deal.
To get started using the new pre-fetch API right away, please
click here to read the API docs…
Need to execute some code after your ads are loaded? Our AJAX code wizard now allows you to create callback functions.
They notify you when the ads load and let you safely execute your custom logic.
Our AJAX code is amazing, but one glaring problem with it is that it decouples the ads from your page by placing them in a safe frame
and that prevents CSS rules from being applied to them. For most types of ads this is not a problem. However, if you have been unable to
switch to AJAX due to this you will be happy to learn that our AJAX code wizard now has an option to include an external style sheet.
- Editing Stuff: When you want to edit a campaign, media, zone, etc… you can now simply click on their name instead of having to click on the little edit icon.
- Disabled Stuff: We no longer show disabled campaigns, media or zones in the Not Assigned box because it really makes no sense and potentially cause problems to do things like assign a campaign to a disabled zone right?
- Organizing Files: Our file browser now allows you to move folders and files around, so if you have a big mess of files in one folder you can now clean that up!
- Effect Callbacks: Something we didn’t think about with our crawler, lightbox, overlay or shoutbox was audio and video. If someone closes a lightbox you definitely want to stop those from playing. Now you can set up a callback function in your banner that will be called on close so you can do that!
- More HTML5 Assets: We now allow HTML5 banners to include iCal (.ics) and JSON (.json) files.
- Lighter Page Peels: Our page peel no longer uses jQuery, which makes it load about 50% faster!
- UC Browser: You may never have heard of UC Browser unless you have a lot of traffic from Asia, but nevertheless we now recognize it in our targeting and reporting.
- Third-Party Referrers: The code wizard for generating third-party code that is intended to be hosted in a third-party ad server now has a Referrer Detection option to enable our advanced referrer detection, which really helps yield better insight into deployed domains.
- Inventory Reports: Our inventory reports have been completely redesigned so if you were accessing them with our API you may need to revise your code to deal with all of the field name changes and additions.
- Mass Report Generation: o The new ability to mass generate reports for multiple campaigns, media, zones is also available via the API. However, take caution that if you pass a campaign ID# to the API such as 1,234 it may result in something unexpected. The ad server will interpret this as a request for Campaign ID# 1 and ID# 234. Our API has always specified that ID#’s should be passed as an Integer (meaning unformatted) but we mention this in case you may be passing formatted ID#’s to the API.
We’d love to hear from you. Seriously, don’t hesitate to contact support
if you have questions about any of the new features and improvements.